A speaker design where the speaker points back into the cabinet and bounces around finally coming out large ports in the front. It is intended to maximize low frequencies in a relatively small cabinet.
Interface
Any device that allows one unit to work, drive or communicate with another unit when they cannot do so by just feeding each other often because the units are manufactured by different companies.
Brooks HI FI projectors Amplitude
The extreme range of a signal. Usually measured from the average to the extreme.
Jack Bay
A series of jacks which have connections for most of the inputs and outputs of the equipment in the control room.
Brooks RM 909 reviews Cable, TRS
A less common balanced cable that has 3 different contacts on its 1/4 inch connectors. Most headphone jacks are a good example of a TRS (Tip-Ring-Sleeve) connector. These are sometimes used instead of the more common XLR connection.
Binary
A numbering system based on two. In binary there are two symbols used ("l" and "0").
Ground Lifter
An adapter that takes a three prong power cord and plugs into a two prong outlet, used to disconnect the third (ground) pin of the power outlet. WARNING: It can be VERY DANGEROUS to have no ground connection to the case by using a ground lifter and not grounding the unit by other means.
Channel
1) In multitrack tape machines, this term means the same thing as the term Track (one audio recording made on a portion of the width of a multitrack tape).
2) A single path that an audio signal travels or can travel through a device from an input to an output.
Wednesday, November 27, 2024
Tuesday, November 12, 2024
Brooks RM 909 reviews Initialize
To prepare a digital storage medium (like a floppy disk) so that it will accept and store digital information bits.
Analog Recording
A recording of the continuous changes of an audio waveform.
Brooks HI FI projectors Binary
A numbering system based on two. In binary there are two symbols used ("l" and "0").
Harmonics
Integer multiples of a fundamental frequency, the fundamental itself being the first harmonic, its first overtone the second harmonic, etc. Attributing to instruments, voices, etc. their distinctive timbre.
Brooks RM 909 Editing
1) Changing the sequence of a recording by cutting the recording tape and putting the pieces together in the new sequence with splicing tape.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Electricity
Electrical current (the amount of electron charge passing a point in a conductor per unit of time) or voltage (the force pushing electrons to obtain electrical current).
Cable, 1/4 inch
An unbalanced cable most often used for instruments and patch cords. Commonly referred to as "guitar cords".
Line Out (Output, Send)
Where a signal leaves the board or component.
Analog Recording
A recording of the continuous changes of an audio waveform.
Brooks HI FI projectors Binary
A numbering system based on two. In binary there are two symbols used ("l" and "0").
Harmonics
Integer multiples of a fundamental frequency, the fundamental itself being the first harmonic, its first overtone the second harmonic, etc. Attributing to instruments, voices, etc. their distinctive timbre.
Brooks RM 909 Editing
1) Changing the sequence of a recording by cutting the recording tape and putting the pieces together in the new sequence with splicing tape.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Electricity
Electrical current (the amount of electron charge passing a point in a conductor per unit of time) or voltage (the force pushing electrons to obtain electrical current).
Cable, 1/4 inch
An unbalanced cable most often used for instruments and patch cords. Commonly referred to as "guitar cords".
Line Out (Output, Send)
Where a signal leaves the board or component.
Subscribe to:
Posts (Atom)
Brooks Hi Fi speakers Filter
1) A device that removes signals with frequencies above or below a certain point called the cut-off frequency. 2) An equalizer section, ...
-
Refers to the speakers that face toward the audience. Also called the "main" speakers. Effects Track 1) In film production...
-
A double cymbal on a stand which can be played with a foot pedal or by the top cymbal being hit with a stick. Amplifier (Power amp, He...
-
An input on a dynamics processing device to control the device by an external audio signal. Ground In electronics, a place (terminal...