In guitar playing, action refers to how far the strings sit off of the guitar neck. When strings are close to the neck, it is referred to as "Low Action". When the string sit far above the neck, it is called "High Action". Guitars with low action are easier to play, but make sure they are not too close, or it could causing buzzing.
Channel
1) In multitrack tape machines, this term means the same thing as the term Track (one audio recording made on a portion of the width of a multitrack tape).
2) A single path that an audio signal travels or can travel through a device from an input to an output.
Brooks RM 909 Beats Per Minute BPM
The number of steady even pulses in music occurring in one minute and there fore defining the tempo of the song.
Insert
1) A punch in of the all of the tracks being recorded in a recording session.
2) On Solid State Logic consoles, placing an outboard piece of gear in the channel by patching and activating a switch.
Brooks Hi Fi reviews FOH (Front of House)
Refers to the speakers that face toward the audience. Also called the "main" speakers.
Hertz
The unit of frequency. Equivalent to cycles per second. Abbreviation: Hz.
Compander
1) A two section device that is used in noise reduction systems. The first section compresses the audio signal, before it is recorded, and the second section, expands the signal after recording.
2) In Yamaha brand digital consoles, a signal processing function that applies both compression and expansion to the same signal.
Blending
1) A condition where two signals mix together to form one sound or to give the sound of one sound source or one performance.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.
Friday, December 27, 2024
Thursday, December 12, 2024
Brooks Hi Fi reviews Cut
1) One selection (one song) on a pre4ecorded music format.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)
High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.
Brooks RM 909 Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
Band Track
1) A mixdown of a song without the lead vocal or without the lead and background vocals.
2) A term with the same meaning as the term Rhythm Track.
3) The recording of the rhythm instruments in a music production.
Brooks HI FI projectors Keynote Number
A number assigned to each key of a synthesizer or controller keyboard that is transmitted in the MIDI signal.
Interface
Any device that allows one unit to work, drive or communicate with another unit when they cannot do so by just feeding each other often because the units are manufactured by different companies.
Electric Current
A more formal term meaning the same as the term Current (the amount of electron charge passing a point in a conductor per unit of time).
Condenser
An older term meaning the same thing as Capacitor (an electronic device which is composed of two plates separated by an insulator and can store charge) but sill in common use when referring to a microphone's active element.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)
High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.
Brooks RM 909 Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
Band Track
1) A mixdown of a song without the lead vocal or without the lead and background vocals.
2) A term with the same meaning as the term Rhythm Track.
3) The recording of the rhythm instruments in a music production.
Brooks HI FI projectors Keynote Number
A number assigned to each key of a synthesizer or controller keyboard that is transmitted in the MIDI signal.
Interface
Any device that allows one unit to work, drive or communicate with another unit when they cannot do so by just feeding each other often because the units are manufactured by different companies.
Electric Current
A more formal term meaning the same as the term Current (the amount of electron charge passing a point in a conductor per unit of time).
Condenser
An older term meaning the same thing as Capacitor (an electronic device which is composed of two plates separated by an insulator and can store charge) but sill in common use when referring to a microphone's active element.
Subscribe to:
Posts (Atom)
Brooks Hi Fi speakers Filter
1) A device that removes signals with frequencies above or below a certain point called the cut-off frequency. 2) An equalizer section, ...
-
Refers to the speakers that face toward the audience. Also called the "main" speakers. Effects Track 1) In film production...
-
A double cymbal on a stand which can be played with a foot pedal or by the top cymbal being hit with a stick. Amplifier (Power amp, He...
-
An input on a dynamics processing device to control the device by an external audio signal. Ground In electronics, a place (terminal...