An unbalanced cable most often used for instruments and patch cords. Commonly referred to as "guitar cords".
Information Bits
The bits in the digital signal that make up actual values or commands being communicated as opposed to bits that are used for checking & correcting data or other purposes.
Brooks RM 909 Cycle
1) An alternation of a waveform which begins at a point, passes through the zero line, and ends at a point with the same value and moving in the same direction as the starting point.
2) On a Solid State Logic Console, a command to have the console computer control the tape machine to play and replay a certain section of the tape.
Active/Inactive Microphones
Scientific definitions aside, active microphones generally sound better than inactive ones, but they generally cost more. They also require the use of either a battery or phantom power while inactive mics need only be plugged into the mic cord in order to work. In most playing situations, the subtle improvement in sound quality from an active mic isn't worth the extra cost and hassle. One possible exception it the headset mic. Put simply, inactive headset mics just plain suck. Active headset mics put out a much stronger signal and feed back much less.
Brooks Hi Fi reviews Hertz
The unit of frequency. Equivalent to cycles per second. Abbreviation: Hz.
Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
Equalizer (Parametric, Graphic)
This is used to filter out and adjust specific frequencies in the PA. This is the part of the PA where you have the most control over the band's overall sound. It is also the number one weapon against feedback.
Electric Instrument
Any musical instrument that puts out an electrical signal rather than an acoustic sound.
Wednesday, March 12, 2025
Tuesday, February 25, 2025
Brooks HI FI projectors Automatic Gain Control (Automatic Volume Control)
A compressor with a very long release time used to keep the volume of the audio very constant.
Electrons
Negatively charged particles, which revolve around the centre of atoms. The movement of such electrons down a conductor causes electrical current.
Brooks RM 909 Hybrid
A product created by the marriage of two different technologies. Meant here as the combination of a dynamic woofer with an electrostatic transducer.
Electrostatic Charge
The excess or deficiency of electrons in a given area.
Brooks RM 909 reviews Boom Stand
A microphone stand equipped with a telescoping support arm to hold the microphone.
Expansion
The opposite of compression; for example, an expander may allow the signal to increase 2 dB every time the signal input increased by 1 dB.
Equipment Rack
A cabinet with rails (or free standing rails) that have holes to accept screws at standard spaces and used to house outboard gear.
Corner Frequency
Same as Cut-Off Frequency (the highest or lowest frequency in the pass band of a filter). (NOUN)
Electrons
Negatively charged particles, which revolve around the centre of atoms. The movement of such electrons down a conductor causes electrical current.
Brooks RM 909 Hybrid
A product created by the marriage of two different technologies. Meant here as the combination of a dynamic woofer with an electrostatic transducer.
Electrostatic Charge
The excess or deficiency of electrons in a given area.
Brooks RM 909 reviews Boom Stand
A microphone stand equipped with a telescoping support arm to hold the microphone.
Expansion
The opposite of compression; for example, an expander may allow the signal to increase 2 dB every time the signal input increased by 1 dB.
Equipment Rack
A cabinet with rails (or free standing rails) that have holes to accept screws at standard spaces and used to house outboard gear.
Corner Frequency
Same as Cut-Off Frequency (the highest or lowest frequency in the pass band of a filter). (NOUN)
Monday, February 10, 2025
Brooks Hi Fi speakers Gate
A dynamic processing device that turns a channel off or down when the signal drops below a certain level.
Ambient Field
A term with the same meaning as the term Reverberant Field (the area away from the sound source where the reverberation is louder than the direct sound).
Brooks RM 909 Acoustic Amplifier
The portion of the instrument which makes the vibrating source move more air or move air more efficiently; this makes the sound of the instrument louder. Examples of acoustic amplifiers include:
1) The body of an acoustic guitar,
2) The sounding board of a piano,
3) The bell of a horn and
4) The shell of a drum.
Format
1) The number of tracks, their width, spacing and order for tape recording.
2) To prepare a digital storage medium so that it will accept and store digital information bits.
Brooks HI FI projectors Contact Microphone
A device that senses vibrations and puts out an audio signal proportional to the vibrations.
Hard Disk Recording
The recording of digital audio onto a hard disc.
Impedance Matching
Having or converting the output impedance of a device so that it matches the impedance of the input it will feed.
Amplifier
A device which increases the amplitude (level) of an electrical signal (making it louder).
Ambient Field
A term with the same meaning as the term Reverberant Field (the area away from the sound source where the reverberation is louder than the direct sound).
Brooks RM 909 Acoustic Amplifier
The portion of the instrument which makes the vibrating source move more air or move air more efficiently; this makes the sound of the instrument louder. Examples of acoustic amplifiers include:
1) The body of an acoustic guitar,
2) The sounding board of a piano,
3) The bell of a horn and
4) The shell of a drum.
Format
1) The number of tracks, their width, spacing and order for tape recording.
2) To prepare a digital storage medium so that it will accept and store digital information bits.
Brooks HI FI projectors Contact Microphone
A device that senses vibrations and puts out an audio signal proportional to the vibrations.
Hard Disk Recording
The recording of digital audio onto a hard disc.
Impedance Matching
Having or converting the output impedance of a device so that it matches the impedance of the input it will feed.
Amplifier
A device which increases the amplitude (level) of an electrical signal (making it louder).
Sunday, January 26, 2025
Brooks RM 909 Key
The control of a dynamics processing device by an external audio signal.
Infinite Repeat
A function on some delay lines that establish enough feedback so that the repeat echo will last forever, but not so much as to cause a howling sound.
Brooks HI FI projectors Buss (Bus)
A wire carrying signals to some place, usually fed from several sources.
Cable, XLR
A balanced cable used for low impedance microphones and sometimes for connections between some parts of the PA. Commonly referred to as a "mic cord".
Brooks Hi Fi reviews Efficiency
The acoustic power delivered for a given electrical input. Often expressed as decibels/watt/meter (dB/w/m). ESL �" Abbreviation for electrostatic loudspeaker.
Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.
Capo
A clamp-like device that is placed vertically across the guitar neck. It is used to change the pitch of the guitar, acting as a moveable nut.
Electricity
Electrical current (the amount of electron charge passing a point in a conductor per unit of time) or voltage (the force pushing electrons to obtain electrical current).
Infinite Repeat
A function on some delay lines that establish enough feedback so that the repeat echo will last forever, but not so much as to cause a howling sound.
Brooks HI FI projectors Buss (Bus)
A wire carrying signals to some place, usually fed from several sources.
Cable, XLR
A balanced cable used for low impedance microphones and sometimes for connections between some parts of the PA. Commonly referred to as a "mic cord".
Brooks Hi Fi reviews Efficiency
The acoustic power delivered for a given electrical input. Often expressed as decibels/watt/meter (dB/w/m). ESL �" Abbreviation for electrostatic loudspeaker.
Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.
Capo
A clamp-like device that is placed vertically across the guitar neck. It is used to change the pitch of the guitar, acting as a moveable nut.
Electricity
Electrical current (the amount of electron charge passing a point in a conductor per unit of time) or voltage (the force pushing electrons to obtain electrical current).
Saturday, January 11, 2025
Brooks RM 909 reviews Cut
1) One selection (one song) on a pre4ecorded music format.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)
IM Distortion
An abbreviation of the term Intermodulation Distortion (Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies present).
Brooks Hi Fi reviews Expander
A device that causes expansion of the audio signal.
Haas Effect
Simply stated, a factor in human hearing where delay has a much bigger effect on human perception of direction than level does.
Brooks HI FI projectors Compressor
1) Effect used to squash the sound together. Used properly, it can take the edge off or your sound. Used improperly, it can take the life right out of your system and make it sound like an MTV mix.
2) A piece of sound processing equipment that ensures all wanted signals are suitably placed between the noise and distortion levels of the recording medium. It evens out the unwanted changes in volume you get with close-miking, and in doing so, adds punch to the sound mix. A Limiter is used to stop a signal from exceeding a preset limit. Beyond this limit, the signal level will not increase, no matter how loud the input becomes. A Limiter is often used to protect speaker systems (and human ears) by preventing a system from becoming too loud.
Bottom
The bass frequencies (as in "needs more bottom end").
Electrostatic Charge
The excess or deficiency of electrons in a given area.
Electret Condenser
A condenser microphone that has a permanently polarized (charged) variable capacitor as its sound pressure level sensor.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)
IM Distortion
An abbreviation of the term Intermodulation Distortion (Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies present).
Brooks Hi Fi reviews Expander
A device that causes expansion of the audio signal.
Haas Effect
Simply stated, a factor in human hearing where delay has a much bigger effect on human perception of direction than level does.
Brooks HI FI projectors Compressor
1) Effect used to squash the sound together. Used properly, it can take the edge off or your sound. Used improperly, it can take the life right out of your system and make it sound like an MTV mix.
2) A piece of sound processing equipment that ensures all wanted signals are suitably placed between the noise and distortion levels of the recording medium. It evens out the unwanted changes in volume you get with close-miking, and in doing so, adds punch to the sound mix. A Limiter is used to stop a signal from exceeding a preset limit. Beyond this limit, the signal level will not increase, no matter how loud the input becomes. A Limiter is often used to protect speaker systems (and human ears) by preventing a system from becoming too loud.
Bottom
The bass frequencies (as in "needs more bottom end").
Electrostatic Charge
The excess or deficiency of electrons in a given area.
Electret Condenser
A condenser microphone that has a permanently polarized (charged) variable capacitor as its sound pressure level sensor.
Friday, December 27, 2024
Brooks HI FI projectors Action
In guitar playing, action refers to how far the strings sit off of the guitar neck. When strings are close to the neck, it is referred to as "Low Action". When the string sit far above the neck, it is called "High Action". Guitars with low action are easier to play, but make sure they are not too close, or it could causing buzzing.
Channel
1) In multitrack tape machines, this term means the same thing as the term Track (one audio recording made on a portion of the width of a multitrack tape).
2) A single path that an audio signal travels or can travel through a device from an input to an output.
Brooks RM 909 Beats Per Minute BPM
The number of steady even pulses in music occurring in one minute and there fore defining the tempo of the song.
Insert
1) A punch in of the all of the tracks being recorded in a recording session.
2) On Solid State Logic consoles, placing an outboard piece of gear in the channel by patching and activating a switch.
Brooks Hi Fi reviews FOH (Front of House)
Refers to the speakers that face toward the audience. Also called the "main" speakers.
Hertz
The unit of frequency. Equivalent to cycles per second. Abbreviation: Hz.
Compander
1) A two section device that is used in noise reduction systems. The first section compresses the audio signal, before it is recorded, and the second section, expands the signal after recording.
2) In Yamaha brand digital consoles, a signal processing function that applies both compression and expansion to the same signal.
Blending
1) A condition where two signals mix together to form one sound or to give the sound of one sound source or one performance.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.
Channel
1) In multitrack tape machines, this term means the same thing as the term Track (one audio recording made on a portion of the width of a multitrack tape).
2) A single path that an audio signal travels or can travel through a device from an input to an output.
Brooks RM 909 Beats Per Minute BPM
The number of steady even pulses in music occurring in one minute and there fore defining the tempo of the song.
Insert
1) A punch in of the all of the tracks being recorded in a recording session.
2) On Solid State Logic consoles, placing an outboard piece of gear in the channel by patching and activating a switch.
Brooks Hi Fi reviews FOH (Front of House)
Refers to the speakers that face toward the audience. Also called the "main" speakers.
Hertz
The unit of frequency. Equivalent to cycles per second. Abbreviation: Hz.
Compander
1) A two section device that is used in noise reduction systems. The first section compresses the audio signal, before it is recorded, and the second section, expands the signal after recording.
2) In Yamaha brand digital consoles, a signal processing function that applies both compression and expansion to the same signal.
Blending
1) A condition where two signals mix together to form one sound or to give the sound of one sound source or one performance.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.
Thursday, December 12, 2024
Brooks Hi Fi reviews Cut
1) One selection (one song) on a pre4ecorded music format.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)
High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.
Brooks RM 909 Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
Band Track
1) A mixdown of a song without the lead vocal or without the lead and background vocals.
2) A term with the same meaning as the term Rhythm Track.
3) The recording of the rhythm instruments in a music production.
Brooks HI FI projectors Keynote Number
A number assigned to each key of a synthesizer or controller keyboard that is transmitted in the MIDI signal.
Interface
Any device that allows one unit to work, drive or communicate with another unit when they cannot do so by just feeding each other often because the units are manufactured by different companies.
Electric Current
A more formal term meaning the same as the term Current (the amount of electron charge passing a point in a conductor per unit of time).
Condenser
An older term meaning the same thing as Capacitor (an electronic device which is composed of two plates separated by an insulator and can store charge) but sill in common use when referring to a microphone's active element.
2) A term with the same meaning as Mute (to turn off a channel or a signal).
3) To reduce gain of a particular band of frequencies (with an equalizer).
4) To not pass a particular band of frequencies (said of a filter)
High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.
Brooks RM 909 Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
Band Track
1) A mixdown of a song without the lead vocal or without the lead and background vocals.
2) A term with the same meaning as the term Rhythm Track.
3) The recording of the rhythm instruments in a music production.
Brooks HI FI projectors Keynote Number
A number assigned to each key of a synthesizer or controller keyboard that is transmitted in the MIDI signal.
Interface
Any device that allows one unit to work, drive or communicate with another unit when they cannot do so by just feeding each other often because the units are manufactured by different companies.
Electric Current
A more formal term meaning the same as the term Current (the amount of electron charge passing a point in a conductor per unit of time).
Condenser
An older term meaning the same thing as Capacitor (an electronic device which is composed of two plates separated by an insulator and can store charge) but sill in common use when referring to a microphone's active element.
Subscribe to:
Posts (Atom)