Wednesday, May 31, 2023

Brooks Hi Fi speakers Equipment Rack

A cabinet with rails (or free standing rails) that have holes to accept screws at standard spaces and used to house outboard gear.

Foot Pedal
1) An effects device where the amount of the effect can be controlled by a musician with his foot.
2) The beater mechanism of a foot drum that is activated by the drummer's foot to play the drum.
3) Any device, like a volume control, that can be operated by the foot.

Brooks RM 909 reviews Clip
The action of deforming a waveform during overload.

Echo Chamber
1) A room designed with very hard, non-parallel surfaces and equipped with a speaker and microphone.
2) Any artificial or electronic device that simulates the reverberation created in a room.

Brooks HI FI projectors Hypercardioid Pattern
A microphone pick up sensitivity pattern where the least sensitive pick up point is more than 90 degrees but less than 150 degrees off axis (usually 120 degrees).

Front Loaded
A speaker cabinet where the speaker faces out toward the front.

Electrostatic Charge
The excess or deficiency of electrons in a given area.

Acoustic/Acoustical
Having to do with sound that can be heard by the ears.
AcousticsThe behaviour of sound and its study. The acoustics of a room depend on its size and shape and the amount and position of sound-absorbing and reflecting material.

Tuesday, May 30, 2023

Brooks Hi Fi speakers Decibel (dB)

1) Relative measurement for the volume (loudness) of sound. Also used to measure the difference between two voltages, or two currents. See Zero dB.
2) A numerical expression of the relative loudness of a sound. The difference in decibels between two
sounds is ten times the common logarithm of the ratio of their power levels.

Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).

Brooks RM 909 Inverse Square Law
Simply stated, the fact that in an un-obstructed area (like an open field) the sound pressure level will drop to half-pressure (-6 dB) every time the distance to the sound source is doubled.

Amplitude
The height of a waveform above or below the zero line.

Brooks HI FI projectors Delay (Digital, Analogue)
1) Effect used to create echo…echo…echo…echo…echo…
2) In more advanced systems used in very large venues, delay can be used to time the arrival of the signal to the speakers in the back of the room so that people in the back hear the sound coming from those speakers at the same time that the sound coming from the speakers in the front of the room arrives.

Lead
The musical instrument that plays the melody of the tune, including the vocal.

Golden Section
A ratio of height to width to length of a room to achieve "good acoustics" and first recommended by the ancient Greeks. The ratio is approximately the width 1.6 times the height and the length 2.6 times the height

Hum
The 60 Hz power line current accidentally induced or fed into electronic equipment.

Monday, May 29, 2023

Brooks Gt 44 reviews Head

1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.

CD (Compact Disc) :
1) Digital sound storage medium. Provides a high quality source of music, sound effects etc. Also used as a playback medium for sound effects etc. by large theatres with long running shows, although CDR (Recordable CD) is becoming more affordable by the day.
2) An abbreviation of the term Compact Disc (a small optical disk with digital audio recorded on it).

BROOKS AUDIO DESIGN reviews Integrated Circuit (IC)
A miniature circuit of many components in a small, sealed housing with prongs to connect it into equipment.

Intermodulation Distortion
Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies.

Brooks Cinema XS - 45 reviews Crossover, Active
A rack mountable unit used to separate frequencies leaving the soundboard into high's, mids, and lows with different outputs for each.

Insulator
A substance such as glass, air, plastic, etc., that will (for all practical purposes) not conduct electricity.

Hearing Limitation
An inability of the ear to hear important characteristics of sound under certain conditions. Characteristics that can be affected include pitch, level, clarity, presence and direction.

Gain Reduction
The working of a limiter or compressor reducing gain during high-level passages.

Sunday, May 28, 2023

Brooks XS - 45 reviews Decibel (dB)

1) Relative measurement for the volume (loudness) of sound. Also used to measure the difference between two voltages, or two currents. See Zero dB.
2) A numerical expression of the relative loudness of a sound. The difference in decibels between two
sounds is ten times the common logarithm of the ratio of their power levels.

Hybrid
A product created by the marriage of two different technologies. Meant here as the combination of a dynamic woofer with an electrostatic transducer.

BROOKS AUDIO reviews Group Master
A slide control used to send out a control voltage to several VCA faders in individual channels, thus controlling the gain of several channels.

Driver
See transducer. Dynamic Range �" The range between the quietest and the loudest sounds a device can handle (often quoted in dB).

Brooks Cinema DESIGN ZL 44 reviews Channels
These are divided into two separate categories. Input channels are those channels coming into the soundboard such as microphones and direct lines. Output channels are those leaving the board such as monitor and main outputs.

Ground Lifter
An adapter that takes a three prong power cord and plugs into a two prong outlet, used to disconnect the third (ground) pin of the power outlet. WARNING: It can be VERY DANGEROUS to have no ground connection to the case by using a ground lifter and not grounding the unit by other means.

Jack
1) Anywhere you plug something in.
2) Segmented audio connector. Mono Jacks have two connections �" tip and sleeve, and are unbalanced. Stereo jacks have three connections �" tip, ring and sleeve. B-type jacks (also known as Bantam jacks) were originally designed for use in telephone exchanges and provide a high quality (and expensive) connection in jackfields. A-type jacks are cheaper and more common, but more fragile. A type jacks are available in 2 sizes : quarter inch and eighth inch.
3) A connector mounted on the case of a device or on a panel.

Instrument Amplifier
A device that has a power amplifier and speaker in a case (or in separate cases) to reproduce the signal put out by an electric instrument (such as an electric guitar) and to allow the instrument to be heard.

Saturday, May 27, 2023

Brooks Hi Fi reviews Compression Ratio

How many dB the input signal has to rise above the threshold for every one dB more output of a compressor or limiter.

Hz (Hertz)
1) An abbreviation for the term Hertz (the unit of frequency).
2) Unit of frequency equivalent to the number of cycles per second.

BROOKS HI fi reviews Final Mix
The two track stereo master tape which was mixed from the multitrack master.

Diffraction
The breaking up of a sound wave caused by some type of mechanical interference such as a cabinet edge, grill frame, or other similar object.

Brooks Cinema KM 22 reviews Consumer Format (Consumer DIF)
A standard adopted by IEC for sending and receiving digital audio based on The AES Professional Interface.

Cue Send Control
A control that will adjust the amount of signal sent to a cue buss from a console channel.

Line Input
An input designed to take a line level signal.

Haas Effect
Simply stated, a factor in human hearing where delay has a much bigger effect on human perception of direction than level does.

Friday, May 26, 2023

Brooks Cinema ZL 44 reviews Information Bits

The bits in the digital signal that make up actual values or commands being communicated as opposed to bits that are used for checking & correcting data or other purposes.

Electromagnetic Field
Magnetic energy put out because of current travelling through a conductor.

Brooks Hi Fi reviews Hall
A large building designed for concerts; also called a concert hall.

Echo
1) One distinct repeat of a sound because of the sound reflecting off a surface.
2) Loosely, used to mean reverberation (the continuing of a sound after the source stops emitting it, caused by many discrete echoes closely spaced in time).

Brooks Speakers reviews Coax
Two-conductor cable consisting of one conductor surrounded by a shield.

Frequency
Practically speaking, high frequency means high pitch and low frequency means low pitch.

Line Input
An input designed to take a line level signal.

Effects
Electronic boxes (usually rack mounted) added to a PA system to subtly change and enhance the signals going through it. Examples include; Reverb, Delay, Compressor, Chorus.

Thursday, May 25, 2023

Brooks KM 22 reviews Board

1) Another, less formal, term for Console.
2) A set of controls and their housing which control all signals necessary for recording and for mixing.
3) A slang shortening of the term Keyboard Instrument.

Far Field
The area from 3 feet away from the sound source up to the critical distance.

Brooks Cinema KM 22 reviews Electromagnetic Theory
A statement of the principles behind electromagnetic induction: When a conductor cuts magnetic lines of force, current is induced in that conductor.

Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.

Brooks Cinema Projectors reviews Buss (Bus)
A wire carrying signals to some place, usually fed from several sources.

Delay
Outboard sound equipment that can momentarily stores a signal being sent to part of a P.A. system so that delayed reinforced sound reaches the audience at the same time as live sound from the stage.

Fly In
1) To add sounds into a mix or recording that have no synchronization.
2) An application of this where a performance from one part of a tune is recorded and then recorded back into the recording at a different time in the recording.

Aux Send
Short for the term Auxiliary Send (a control to adjust the level of the signal sent from the console input channel to the auxiliary equipment through the aux buss.

Brooks HI FI projectors Fly In

1) To add sounds into a mix or recording that have no synchronization. 2) An application of this where a performance from one part of a ...