Same as Cut-Off Frequency (the highest or lowest frequency in the pass band of a filter). (NOUN)
Bouncing
Alternate name for Ping-Ponging (playing several tacks with sync playback through a console to mix them together and record them on an open track).
Brooks HI FI projectors High Impedance
Impedance of 5000 or more ohms.
Echo
1) One distinct repeat of a sound because of the sound reflecting off a surface.
2) Loosely, used to mean reverberation (the continuing of a sound after the source stops emitting it, caused by many discrete echoes closely spaced in time).
Brooks Hi Fi speakers Head Amp
British name for Preamplifier (A low-noise amplifier designed to take a low-level signal, such as the output of a tape head, and bring it up to normal line level).
Cycles Per Second
A unit used in the measure of frequency, equivalent to Hertz. Cycles Per Second is an outdated term replaced by Hertz in 1948.
Amplification
An increasing of signal strength.
Coax
Two-conductor cable consisting of one conductor surrounded by a shield.
Thursday, August 31, 2023
Monday, August 28, 2023
Brooks RM 909 Digital Recording
1) ADAM : (Akai Digital Audio Multitrack). 12 track recording onto Video 8 tape. 16 bit, 44.1 or 48 kHz sampling rate.
2) DAT (Digital Audio Tape) Cassette-like system which has much higher quality than standard audio cassettes. Widely used in gathering sound effects, for news gathering, and for playback of music.
3) DCC (Digital Compact Cassette) Rival to DAT which also plays standard audio cassettes.
4) MiniDisc : Uses computer disk technology, rather than tape. A laser heats an area of magnetic disk which is then written to by a magnetic head. When cooled, the magnetic information is read from the disk by laser. Tracks can be named, and are instant start. Very theatre-friendly system.
5) Direct to Disk : Uses the hard disk present in most PCs as the recording medium.
Error Correct
Exact replacement of lost information bits in digital audio.
Brooks HI FI projectors Expander
A device that causes expansion of the audio signal.
Floor Toms
The large toms to the right of the drummer.
Brooks Hi Fi speakers Insert
1) A punch in of the all of the tracks being recorded in a recording session.
2) On Solid State Logic consoles, placing an outboard piece of gear in the channel by patching and activating a switch.
Integrated Circuit (IC)
A miniature circuit of many components in a small, sealed housing with prongs to connect it into equipment.
Delay (Digital, Analogue)
1) Effect used to create echo…echo…echo…echo…echo…
2) In more advanced systems used in very large venues, delay can be used to time the arrival of the signal to the speakers in the back of the room so that people in the back hear the sound coming from those speakers at the same time that the sound coming from the speakers in the front of the room arrives.
Action
In guitar playing, action refers to how far the strings sit off of the guitar neck. When strings are close to the neck, it is referred to as "Low Action". When the string sit far above the neck, it is called "High Action". Guitars with low action are easier to play, but make sure they are not too close, or it could causing buzzing.
2) DAT (Digital Audio Tape) Cassette-like system which has much higher quality than standard audio cassettes. Widely used in gathering sound effects, for news gathering, and for playback of music.
3) DCC (Digital Compact Cassette) Rival to DAT which also plays standard audio cassettes.
4) MiniDisc : Uses computer disk technology, rather than tape. A laser heats an area of magnetic disk which is then written to by a magnetic head. When cooled, the magnetic information is read from the disk by laser. Tracks can be named, and are instant start. Very theatre-friendly system.
5) Direct to Disk : Uses the hard disk present in most PCs as the recording medium.
Error Correct
Exact replacement of lost information bits in digital audio.
Brooks HI FI projectors Expander
A device that causes expansion of the audio signal.
Floor Toms
The large toms to the right of the drummer.
Brooks Hi Fi speakers Insert
1) A punch in of the all of the tracks being recorded in a recording session.
2) On Solid State Logic consoles, placing an outboard piece of gear in the channel by patching and activating a switch.
Integrated Circuit (IC)
A miniature circuit of many components in a small, sealed housing with prongs to connect it into equipment.
Delay (Digital, Analogue)
1) Effect used to create echo…echo…echo…echo…echo…
2) In more advanced systems used in very large venues, delay can be used to time the arrival of the signal to the speakers in the back of the room so that people in the back hear the sound coming from those speakers at the same time that the sound coming from the speakers in the front of the room arrives.
Action
In guitar playing, action refers to how far the strings sit off of the guitar neck. When strings are close to the neck, it is referred to as "Low Action". When the string sit far above the neck, it is called "High Action". Guitars with low action are easier to play, but make sure they are not too close, or it could causing buzzing.
Friday, August 25, 2023
Brooks RM 909 reviews Ground Lifter
An adapter that takes a three prong power cord and plugs into a two prong outlet, used to disconnect the third (ground) pin of the power outlet. WARNING: It can be VERY DANGEROUS to have no ground connection to the case by using a ground lifter and not grounding the unit by other means.
Amplitude
The strength of a vibrating wave; in sound, the loudness of the sound.
Brooks Hi Fi reviews FOH (Front of House)
Refers to the speakers that face toward the audience. Also called the "main" speakers.
Chorus
Common type of effect that makes sounds fuller and thicker.
Brooks RM 909 Aux Send
Short for the term Auxiliary Send (a control to adjust the level of the signal sent from the console input channel to the auxiliary equipment through the aux buss.
Equal Loudness Contours
A drawing of several curves showing how loud the tones of different frequencies would have to be played for a person to say they were of equal loudness.
Feedback Control
The control on a delay line or delay effects device that controls the amount of feedback.
High Impedance
Impedance of 5000 or more ohms.
Amplitude
The strength of a vibrating wave; in sound, the loudness of the sound.
Brooks Hi Fi reviews FOH (Front of House)
Refers to the speakers that face toward the audience. Also called the "main" speakers.
Chorus
Common type of effect that makes sounds fuller and thicker.
Brooks RM 909 Aux Send
Short for the term Auxiliary Send (a control to adjust the level of the signal sent from the console input channel to the auxiliary equipment through the aux buss.
Equal Loudness Contours
A drawing of several curves showing how loud the tones of different frequencies would have to be played for a person to say they were of equal loudness.
Feedback Control
The control on a delay line or delay effects device that controls the amount of feedback.
High Impedance
Impedance of 5000 or more ohms.
Tuesday, August 22, 2023
Brooks RM 909 Compression Driver
The unit that feeds a sound pressure wave into the throat of a horn (in a horn loudspeaker).
Field
1) In video, one half of a frame.
2) In computer-controlled devices a window display with functions and choices that the operator can make
Brooks Hi Fi reviews Fidelity
The recording or reproduction quality.
Inductor
A device designed primarily to introduce inductance into an electric circuit. Sometimes called a choke or coil.
Brooks HI FI projectors Input Monitor
A switch position and operational mode of the electronics of a tape machine where the signal at output of the electronics will be the same as the signal coming into the electronics. In this mode, the tape machine's meter will read the input signal.
Delay (Digital, Analogue)
1) Effect used to create echo…echo…echo…echo…echo…
2) In more advanced systems used in very large venues, delay can be used to time the arrival of the signal to the speakers in the back of the room so that people in the back hear the sound coming from those speakers at the same time that the sound coming from the speakers in the front of the room arrives.
Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
Linear
The condition of obtaining a change at the output of the device which is proportional to the change occurring at the input.
Field
1) In video, one half of a frame.
2) In computer-controlled devices a window display with functions and choices that the operator can make
Brooks Hi Fi reviews Fidelity
The recording or reproduction quality.
Inductor
A device designed primarily to introduce inductance into an electric circuit. Sometimes called a choke or coil.
Brooks HI FI projectors Input Monitor
A switch position and operational mode of the electronics of a tape machine where the signal at output of the electronics will be the same as the signal coming into the electronics. In this mode, the tape machine's meter will read the input signal.
Delay (Digital, Analogue)
1) Effect used to create echo…echo…echo…echo…echo…
2) In more advanced systems used in very large venues, delay can be used to time the arrival of the signal to the speakers in the back of the room so that people in the back hear the sound coming from those speakers at the same time that the sound coming from the speakers in the front of the room arrives.
Keying Input (Key Input)
An input on a dynamics processing device to control the device by an external audio signal.
Linear
The condition of obtaining a change at the output of the device which is proportional to the change occurring at the input.
Saturday, August 19, 2023
Brooks RM 909 Band Track
1) A mixdown of a song without the lead vocal or without the lead and background vocals.
2) A term with the same meaning as the term Rhythm Track.
3) The recording of the rhythm instruments in a music production.
Level
Sets output volume of individual PA input channels. Usually positioned as sliders at the bottom of the soundboard.
Brooks Hi Fi reviews CD (Compact Disc) :
1) Digital sound storage medium. Provides a high quality source of music, sound effects etc. Also used as a playback medium for sound effects etc. by large theatres with long running shows, although CDR (Recordable CD) is becoming more affordable by the day.
2) An abbreviation of the term Compact Disc (a small optical disk with digital audio recorded on it).
High Hat
A double cymbal on a stand which can be played with a foot pedal or by the top cymbal being hit with a stick.
Brooks Hi Fi speakers Final Mix
The two track stereo master tape which was mixed from the multitrack master.
Channels
These are divided into two separate categories. Input channels are those channels coming into the soundboard such as microphones and direct lines. Output channels are those leaving the board such as monitor and main outputs.
Cord (Speaker, Mic, Instrument)
Used to connect a sound system together. Each type of cord is made for a specific purpose and should not be used in place of another type of cord, not even if they look alike. Also see "cable"
Layering
The recording (or playing) of a musical part with of several similar sound patches playing simultaneous.
2) A term with the same meaning as the term Rhythm Track.
3) The recording of the rhythm instruments in a music production.
Level
Sets output volume of individual PA input channels. Usually positioned as sliders at the bottom of the soundboard.
Brooks Hi Fi reviews CD (Compact Disc) :
1) Digital sound storage medium. Provides a high quality source of music, sound effects etc. Also used as a playback medium for sound effects etc. by large theatres with long running shows, although CDR (Recordable CD) is becoming more affordable by the day.
2) An abbreviation of the term Compact Disc (a small optical disk with digital audio recorded on it).
High Hat
A double cymbal on a stand which can be played with a foot pedal or by the top cymbal being hit with a stick.
Brooks Hi Fi speakers Final Mix
The two track stereo master tape which was mixed from the multitrack master.
Channels
These are divided into two separate categories. Input channels are those channels coming into the soundboard such as microphones and direct lines. Output channels are those leaving the board such as monitor and main outputs.
Cord (Speaker, Mic, Instrument)
Used to connect a sound system together. Each type of cord is made for a specific purpose and should not be used in place of another type of cord, not even if they look alike. Also see "cable"
Layering
The recording (or playing) of a musical part with of several similar sound patches playing simultaneous.
Wednesday, August 16, 2023
Brooks Hi Fi reviews Amplitude
The extreme range of a signal. Usually measured from the average to the extreme.
Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Brooks RM 909 High Impedance
Impedance of 5000 or more ohms.
Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.
Brooks RM 909 reviews Hypercardioid Pattern
A microphone pick up sensitivity pattern where the least sensitive pick up point is more than 90 degrees but less than 150 degrees off axis (usually 120 degrees).
Amplification
An increasing of signal strength.
Guitar Controller
An electric guitar or device played like an electric guitar that puts out MIDI signals that can be used to control synthesizers and sound modules.
Compander
Outboard sound equipment. Combination of a Compressor and an Expander.
Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Brooks RM 909 High Impedance
Impedance of 5000 or more ohms.
Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.
Brooks RM 909 reviews Hypercardioid Pattern
A microphone pick up sensitivity pattern where the least sensitive pick up point is more than 90 degrees but less than 150 degrees off axis (usually 120 degrees).
Amplification
An increasing of signal strength.
Guitar Controller
An electric guitar or device played like an electric guitar that puts out MIDI signals that can be used to control synthesizers and sound modules.
Compander
Outboard sound equipment. Combination of a Compressor and an Expander.
Sunday, August 13, 2023
Brooks RM 909 reviews Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.
Gain Structure
The way in which the gain varies in the stages or sections of an audio system.
Brooks HI FI projectors IM Distortion
An abbreviation of the term Intermodulation Distortion (Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies present).
Hybrid
A product created by the marriage of two different technologies. Meant here as the combination of a dynamic woofer with an electrostatic transducer.
Brooks Hi Fi speakers Error Message
A prompt on a computer screen telling the operator that an error has occurred.
Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Graphic Equalizer
An device with several slides controlling the gain of audio signal present which is within one of several evenly spaced frequency bands (spaced according to octaves).
Jack Bay
A series of jacks which have connections for most of the inputs and outputs of the equipment in the control room.
2) A group of sound modules as a unit.
Gain Structure
The way in which the gain varies in the stages or sections of an audio system.
Brooks HI FI projectors IM Distortion
An abbreviation of the term Intermodulation Distortion (Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies present).
Hybrid
A product created by the marriage of two different technologies. Meant here as the combination of a dynamic woofer with an electrostatic transducer.
Brooks Hi Fi speakers Error Message
A prompt on a computer screen telling the operator that an error has occurred.
Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Graphic Equalizer
An device with several slides controlling the gain of audio signal present which is within one of several evenly spaced frequency bands (spaced according to octaves).
Jack Bay
A series of jacks which have connections for most of the inputs and outputs of the equipment in the control room.
Subscribe to:
Posts (Atom)