Brooks Cinema xm 808 Bi-Amplification

1) A way of optimizing the efficiency of a speaker system by separately amplifying the High Frequency (HF) and Low Frequency (LF) portions of the sound signal and sending them down two pairs of cables to the speaker. Multipin Speakon connectors have been developed to do this.
2)The process of having of having low-frequency speakers and high-frequency speakers driven by separate amplifiers.

Auxiliary Input or Return
A route back into the sound desk for a signal sent to a piece of outboard equipment via an auxiliary send.

Brooks Cinema Projectors I/O
Short for "Input/Output' and referring to:
1) An in-line console module that contains controls for the input section, output section and monitor section.
2) A module in electronic gear containing input and output amplifiers for the device.
3) A digital port (connector) able to both receive digital data and output digital data.

Error Concealment
Putting replacement information bits into a digital audio signal to replace lost bits when the digital recording or processing system cannot verify whether the lost bits were l's or 0's but can make a good guess by comparing the known bits that were close in position to the lost bits.

Brooks Cinema NZ 60 Foldback
A European term for the signal sent to the stage monitors in a live performance.

Frequency Range
The range of frequencies over which an electronic device is useful or over which a sound source will put out substantial energy.

Layering
The recording (or playing) of a musical part with of several similar sound patches playing simultaneous.

Ground Lifter
An adapter that takes a three prong power cord and plugs into a two prong outlet, used to disconnect the third (ground) pin of the power outlet. WARNING: It can be VERY DANGEROUS to have no ground connection to the case by using a ground lifter and not grounding the unit by other means.