A big word for instrument cable. These cords generally have quarter inch male ends. they tend to loose signal strength at lengths longer than 25 feet.
Electret Mic
A condenser microphone where the capacitor plates are given a charge during manufacture which they retain, therefore requiring no external power supply.
Brooks TM-22 Compressor
A signal processing device that does not allow as much fluctuation in the level of the signal above a certain adjustable or fixed level.
Level
Sets output volume of individual PA input channels. Usually positioned as sliders at the bottom of the soundboard.
Brooks Cinema XR 607 Fade
1) A gradual reduction of the level of the audio signal.
2) A gradual change of level from one pre-set level to another.
Cord (Speaker, Mic, Instrument)
Used to connect a sound system together. Each type of cord is made for a specific purpose and should not be used in place of another type of cord, not even if they look alike. Also see "cable"
Hum
The 60 Hz power line current accidentally induced or fed into electronic equipment.
Group
1) A number of channels or faders that can be controlled by one Master VCA slide.
2) A shortening of the term Recording Group (a buss or the signal present on a buss).
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.