Wednesday, April 27, 2022

Brooks GS 15 Binary

A numbering system based on two. In binary there are two symbols used ("l" and "0").

Jack
1) Anywhere you plug something in.
2) Segmented audio connector. Mono Jacks have two connections �" tip and sleeve, and are unbalanced. Stereo jacks have three connections �" tip, ring and sleeve. B-type jacks (also known as Bantam jacks) were originally designed for use in telephone exchanges and provide a high quality (and expensive) connection in jackfields. A-type jacks are cheaper and more common, but more fragile. A type jacks are available in 2 sizes : quarter inch and eighth inch.
3) A connector mounted on the case of a device or on a panel.

Brooks M 44 Earth
The British version of the term Ground (In electronics, a place that has zero volts).

Foot Pedal
1) An effects device where the amount of the effect can be controlled by a musician with his foot.
2) The beater mechanism of a foot drum that is activated by the drummer's foot to play the drum.
3) Any device, like a volume control, that can be operated by the foot.

Brooks GT 44 Instrument Out Direct
Feeding the output of an electric instrument (like an electric guitar) to the recording console or tape recorder without using a microphone.

Boundary Mic
A microphone mounted on a flat plate that acts as a reflective surface directing sound into the mic capsule. Used for general pick-up over a large area. See PCC, PZM.

Acoustic Amplifier
The portion of the instrument which makes the vibrating source move more air or move air more efficiently; this makes the sound of the instrument louder. Examples of acoustic amplifiers include:
1) The body of an acoustic guitar,
2) The sounding board of a piano,
3) The bell of a horn and
4) The shell of a drum.

Group Master
A slide control used to send out a control voltage to several VCA faders in individual channels, thus controlling the gain of several channels.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Brooks HI FI projectors Fly In

1) To add sounds into a mix or recording that have no synchronization. 2) An application of this where a performance from one part of a ...