Brooks KM 77 Cable, XLR

A balanced cable used for low impedance microphones and sometimes for connections between some parts of the PA. Commonly referred to as a "mic cord".

Lead Sheet
A written chart showing the melody, lyrics and chords of a tune with full musical notation.

Brooks Audio Design QS 70 Jam Sync
A generation of new SMPTE according to the input SMPTE signal

Efficiency
The acoustic power delivered for a given electrical input. Often expressed as decibels/watt/meter (dB/w/m). ESL �" Abbreviation for electrostatic loudspeaker.

Brooks Cinema xm 808 Blending
1) A condition where two signals mix together to form one sound or to give the sound of one sound source or one performance.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.

Comb Filter
1) The frequency response achieved by mixing a direct signal with a delayed signal of equal strength especially at short delays.
2) Loosely used to also describe effects that can be achieved with comb filtering as part of the processing.

Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.

Figure Eight Pattern
Another name for Bi-directional Pattern (microphone pickup pattern picking up best from the front and back of the diaphragm and not picking up from the side of the diaphragm).