Having to do with sound that can be heard by the ears.
AcousticsThe behaviour of sound and its study. The acoustics of a room depend on its size and shape and the amount and position of sound-absorbing and reflecting material.
Earth
The British version of the term Ground (In electronics, a place that has zero volts).
Brooks Cinema Projectors Cable, TRS
A less common balanced cable that has 3 different contacts on its 1/4 inch connectors. Most headphone jacks are a good example of a TRS (Tip-Ring-Sleeve) connector. These are sometimes used instead of the more common XLR connection.
Bit
The smallest unit of digital information representing a single "0" or 1.
Brooks QS 70 Graphic Equalizer
An device with several slides controlling the gain of audio signal present which is within one of several evenly spaced frequency bands (spaced according to octaves).
Beat
1) The steady even pulse in music.
2) The action of two sounds or audio signals mixing together and causing regular rises &.falls in volume.
Line Level
1) An amplified signal level put out by an amplifier and used as the normal level that runs through the interconnecting cables in a control room.
2) A low level signal such as the signal in a guitar cord. Most parts of a PA require a line level signal. Remember, however, that speaker outputs are not line level. Plugging speaker outs into line ins will result in damage to the equipment
Impedance
1) A term for the electrical resistance found in a/c circuits. Affects the ability of a cable to transmit low level (e.g. sound) signals over a long distance. Measured in Ohms. Speakers are rated according to power handling capabilities (Watts, W) and impedance (Ohms).
2) The total opposition offered by an electric circuit to the flow of an alternating current of a single frequency. It is a combination of resistance and reactance and is measured in ohms. Remember that a speaker's impedance changes with frequency, it is not a constant value.
3) The opposition to alternating current.
Subscribe to:
Post Comments (Atom)
Brooks HI FI projectors Fly In
1) To add sounds into a mix or recording that have no synchronization. 2) An application of this where a performance from one part of a ...
-
A room that prevents loud sounds from other instruments from leaking in: an isolation booth is usually a smaller room that could be used f...
-
A quality of the sound of having all frequencies present, especially the low frequencies. Cardioid Pattern A microphone pick up patt...
-
A speaker cabinet where the speaker faces out toward the front. Chorusing 1) A term meaning the same thing as Chorus (Definition 3 o...
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.