Thursday, February 22, 2024

Brooks RM 909 Full

A quality of the sound of having all frequencies present, especially the low frequencies.

Electret Mic
A condenser microphone where the capacitor plates are given a charge during manufacture which they retain, therefore requiring no external power supply.

Brooks RM 909 reviews Limiter
A device which reduces gain when the input voltage exceeds a certain level.

Bass
1) The lower range of audio frequencies up to approximately 250 Hz.
2) Short for Bass Guitar.
3) Lower end of the musical scale. In acoustics, the range (below about 200 Hz) in which there are difficulties, principally in the reproduction of sound, due to the large wavelengths involved.
4) The lower frequencies.
5) On the soundboard this should refer to the bass guitar channel, not the bass drum.
6) The lowest frequencies of sound. Bi-Amplification uses an electronic crossover or line-level amplifiers for the high and low frequency loudspeaker drivers.

Brooks Hi Fi reviews Clock Signal
The signal put out by a circuit that generates steady even pulses or steady codes used for synchronization.

Board
1) Another, less formal, term for Console.
2) A set of controls and their housing which control all signals necessary for recording and for mixing.
3) A slang shortening of the term Keyboard Instrument.

Basic Session
The First session in recording an audio production to record the Basic Tracks.

Level
Sets output volume of individual PA input channels. Usually positioned as sliders at the bottom of the soundboard.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Brooks HI FI projectors Fly In

1) To add sounds into a mix or recording that have no synchronization. 2) An application of this where a performance from one part of a ...