Having more than a normal amount of signal strength at low frequencies or having more sound than normal (by use of compression or delay).
Head Amp
British name for Preamplifier (A low-noise amplifier designed to take a low-level signal, such as the output of a tape head, and bring it up to normal line level).
Brooks RM 909 Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it.
Input Monitor
A switch position and operational mode of the electronics of a tape machine where the signal at output of the electronics will be the same as the signal coming into the electronics. In this mode, the tape machine's meter will read the input signal.
Brooks HI FI projectors Controller
1) In MIDI, a device that generates a MIDI signal to control synthesizers, sound modules or sample playback units.
2) A remote control unit for a multitrack tape machine which controls transport functions as well as monitor selection switching functions and record ready/safe status of each track.
3) Any device generating a control voltage or signal fed to another device's control input.
Keyboard
1) Any musical instrument controlled by pressing a key.
2) The part of the computer that has the keys.
Barrier Micing
A method of placing the head of a microphone as close as possible to a reflective surface, preventing phase cancellation.
Level
The amount of signal strength; the amplitude, especially the average amplitude.
Subscribe to:
Post Comments (Atom)
Brooks HI FI projectors Fly In
1) To add sounds into a mix or recording that have no synchronization. 2) An application of this where a performance from one part of a ...
-
Refers to the speakers that face toward the audience. Also called the "main" speakers. Effects Track 1) In film production...
-
1) A device that removes signals with frequencies above or below a certain point called the cut-off frequency. 2) An equalizer section, ...
-
The First session in recording an audio production to record the Basic Tracks. Folded Horn A speaker design where the speaker points...
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.