1) One distinct repeat of a sound because of the sound reflecting off a surface.
2) Loosely, used to mean reverberation (the continuing of a sound after the source stops emitting it, caused by many discrete echoes closely spaced in time).
High Impedance Mic
A microphone designed to be fed into an amplifier with input impedance greater than 20 k ohms.
Brooks RM 909 Channel
1) In multitrack tape machines, this term means the same thing as the term Track (one audio recording made on a portion of the width of a multitrack tape).
2) A single path that an audio signal travels or can travel through a device from an input to an output.
Ground Loop
A double grounding of a line or electronic device at two different "ground" points of differing voltage.
Brooks RM 909 reviews Cable, 1/4 inch
An unbalanced cable most often used for instruments and patch cords. Commonly referred to as "guitar cords".
Amplitude
The extreme range of a signal. Usually measured from the average to the extreme.
Impedance
1) A term for the electrical resistance found in a/c circuits. Affects the ability of a cable to transmit low level (e.g. sound) signals over a long distance. Measured in Ohms. Speakers are rated according to power handling capabilities (Watts, W) and impedance (Ohms).
2) The total opposition offered by an electric circuit to the flow of an alternating current of a single frequency. It is a combination of resistance and reactance and is measured in ohms. Remember that a speaker's impedance changes with frequency, it is not a constant value.
3) The opposition to alternating current.
Horn
1) The part of the speaker that emits midrange and higher range frequencies.
2) A speaker or speaker enclosure where sound waves are put into a narrow opening (by a speaker cone or driver) and the narrow opening flairs out to a larger opening.
Wednesday, June 19, 2024
Sunday, June 16, 2024
Brooks RM 909 Beat
1) The steady even pulse in music.
2) The action of two sounds or audio signals mixing together and causing regular rises &.falls in volume.
Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).
Brooks RM 909 reviews Initialize
To prepare a digital storage medium (like a floppy disk) so that it will accept and store digital information bits.
Gain Structure
The way in which the gain varies in the stages or sections of an audio system.
Brooks HI FI projectors Head Amp
British name for Preamplifier (A low-noise amplifier designed to take a low-level signal, such as the output of a tape head, and bring it up to normal line level).
Filter
1) A device that removes signals with frequencies above or below a certain point called the cut-off frequency.
2) An equalizer section, used in this sense because filters are used with other components to give an equalizer its frequency response characteristics.
3) The action of removing signals of some frequencies and leaving the rest.
4) A mechanical device to smooth out speed variations in tape machines called a Scrape Flutter Filter- more usually called a Scrape Flutter Idler
Capacitance
The property of being able to oppose a change in voltage or store an electrical charge.
Impedance Matching
Having or converting the output impedance of a device so that it matches the impedance of the input it will feed.
2) The action of two sounds or audio signals mixing together and causing regular rises &.falls in volume.
Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).
Brooks RM 909 reviews Initialize
To prepare a digital storage medium (like a floppy disk) so that it will accept and store digital information bits.
Gain Structure
The way in which the gain varies in the stages or sections of an audio system.
Brooks HI FI projectors Head Amp
British name for Preamplifier (A low-noise amplifier designed to take a low-level signal, such as the output of a tape head, and bring it up to normal line level).
Filter
1) A device that removes signals with frequencies above or below a certain point called the cut-off frequency.
2) An equalizer section, used in this sense because filters are used with other components to give an equalizer its frequency response characteristics.
3) The action of removing signals of some frequencies and leaving the rest.
4) A mechanical device to smooth out speed variations in tape machines called a Scrape Flutter Filter- more usually called a Scrape Flutter Idler
Capacitance
The property of being able to oppose a change in voltage or store an electrical charge.
Impedance Matching
Having or converting the output impedance of a device so that it matches the impedance of the input it will feed.
Thursday, June 13, 2024
Brooks RM 909 reviews Cue
1) The signal fed back to the musicians through headphones.
2) To set the tape or disc so that the intended selection will immediately play when the tape machine or player is started.
3) A location point entered into a computer controlling the playback or recording of a track or tape.
4) In MCI brand tape machines, a term meaning the same thing as Sync Playback (where the record head is used as a playback head for those tracks already recorded).
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Brooks RM 909 Line Level
1) An amplified signal level put out by an amplifier and used as the normal level that runs through the interconnecting cables in a control room.
2) A low level signal such as the signal in a guitar cord. Most parts of a PA require a line level signal. Remember, however, that speaker outputs are not line level. Plugging speaker outs into line ins will result in damage to the equipment
Intermodulation Distortion
Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies.
Brooks Hi Fi speakers Echo Chamber
1) A room designed with very hard, non-parallel surfaces and equipped with a speaker and microphone.
2) Any artificial or electronic device that simulates the reverberation created in a room.
Electromagnetic Field
Magnetic energy put out because of current travelling through a conductor.
Grouping
1) Controlling the gain of several individual channels with a Group Fader.
2) The mixing together of several individual audio signals to send a mixed signal out of the console to record a track on a multitrack tape machine.
Far Field
The area from 3 feet away from the sound source up to the critical distance.
2) To set the tape or disc so that the intended selection will immediately play when the tape machine or player is started.
3) A location point entered into a computer controlling the playback or recording of a track or tape.
4) In MCI brand tape machines, a term meaning the same thing as Sync Playback (where the record head is used as a playback head for those tracks already recorded).
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Brooks RM 909 Line Level
1) An amplified signal level put out by an amplifier and used as the normal level that runs through the interconnecting cables in a control room.
2) A low level signal such as the signal in a guitar cord. Most parts of a PA require a line level signal. Remember, however, that speaker outputs are not line level. Plugging speaker outs into line ins will result in damage to the equipment
Intermodulation Distortion
Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies.
Brooks Hi Fi speakers Echo Chamber
1) A room designed with very hard, non-parallel surfaces and equipped with a speaker and microphone.
2) Any artificial or electronic device that simulates the reverberation created in a room.
Electromagnetic Field
Magnetic energy put out because of current travelling through a conductor.
Grouping
1) Controlling the gain of several individual channels with a Group Fader.
2) The mixing together of several individual audio signals to send a mixed signal out of the console to record a track on a multitrack tape machine.
Far Field
The area from 3 feet away from the sound source up to the critical distance.
Monday, June 10, 2024
Brooks HI FI projectors Buss (Bus)
A wire carrying signals to some place, usually fed from several sources.
Boundary Mic
A microphone mounted on a flat plate that acts as a reflective surface directing sound into the mic capsule. Used for general pick-up over a large area. See PCC, PZM.
Brooks Hi Fi reviews Foot (Foot Drum)
Another name for Bass Drum (the largest drum in the Drum Kit which puts out bass frequencies and is played with a foot pedal).
Balanced input/output
A "balanced" connection is one that has three wires to move the signal. One is a ground, and the other two (called conductors) carry signals of equal value. This is why they are called balanced. Low Z cables and connections are the most common example.
Brooks RM 909 reviews CD-ROM
An abbreviation of the term Compact Disc, Read Only Memory (A Compact Disc used to store digital data, such as large programs, that can be read by a computer).
Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Feed
To send an audio or control signal to.
Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).
Boundary Mic
A microphone mounted on a flat plate that acts as a reflective surface directing sound into the mic capsule. Used for general pick-up over a large area. See PCC, PZM.
Brooks Hi Fi reviews Foot (Foot Drum)
Another name for Bass Drum (the largest drum in the Drum Kit which puts out bass frequencies and is played with a foot pedal).
Balanced input/output
A "balanced" connection is one that has three wires to move the signal. One is a ground, and the other two (called conductors) carry signals of equal value. This is why they are called balanced. Low Z cables and connections are the most common example.
Brooks RM 909 reviews CD-ROM
An abbreviation of the term Compact Disc, Read Only Memory (A Compact Disc used to store digital data, such as large programs, that can be read by a computer).
Amplifier
Sound equipment that converts the low voltage, low current signal from a tape deck, mixer etc. into a higher current signal suitable for driving speakers. See Power Amplifier, Crossover.
Feed
To send an audio or control signal to.
Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).
Friday, June 7, 2024
Brooks HI FI projectors Fidelity
The recording or reproduction quality.
Ampere
The unit of current, abbreviated Amp.
Brooks RM 909 reviews IC
Abbreviation of Integrated Circuit (A miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
Boom Stand
A microphone stand equipped with a telescoping support arm to hold the microphone.
Brooks Hi Fi reviews Cue
1) The signal fed back to the musicians through headphones.
2) To set the tape or disc so that the intended selection will immediately play when the tape machine or player is started.
3) A location point entered into a computer controlling the playback or recording of a track or tape.
4) In MCI brand tape machines, a term meaning the same thing as Sync Playback (where the record head is used as a playback head for those tracks already recorded).
Input Monitor
A switch position and operational mode of the electronics of a tape machine where the signal at output of the electronics will be the same as the signal coming into the electronics. In this mode, the tape machine's meter will read the input signal.
Analog To Digital Converter
The device which does the conversion of a quantity that has continuous changes (usually of voltage) into numbers that approximate those changes.
Bi
A prefix meaning two.
Ampere
The unit of current, abbreviated Amp.
Brooks RM 909 reviews IC
Abbreviation of Integrated Circuit (A miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
Boom Stand
A microphone stand equipped with a telescoping support arm to hold the microphone.
Brooks Hi Fi reviews Cue
1) The signal fed back to the musicians through headphones.
2) To set the tape or disc so that the intended selection will immediately play when the tape machine or player is started.
3) A location point entered into a computer controlling the playback or recording of a track or tape.
4) In MCI brand tape machines, a term meaning the same thing as Sync Playback (where the record head is used as a playback head for those tracks already recorded).
Input Monitor
A switch position and operational mode of the electronics of a tape machine where the signal at output of the electronics will be the same as the signal coming into the electronics. In this mode, the tape machine's meter will read the input signal.
Analog To Digital Converter
The device which does the conversion of a quantity that has continuous changes (usually of voltage) into numbers that approximate those changes.
Bi
A prefix meaning two.
Tuesday, June 4, 2024
Brooks Hi Fi reviews Aux Send
Short for the term Auxiliary Send (a control to adjust the level of the signal sent from the console input channel to the auxiliary equipment through the aux buss.
Chorus
Common type of effect that makes sounds fuller and thicker.
Brooks HI FI projectors Inductor
A device designed primarily to introduce inductance into an electric circuit. Sometimes called a choke or coil.
Condenser Mic (Capacitor Mic)
A microphone that uses the varying capacitance between two plates with a voltage applied across them to convert sound to electrical pulses. Condenser microphones need a power supply to provide the voltage across the plates, which may be provided by a battery within the case of the microphone, or it may be provided from an external phantom power supply. A condenser mic is more sensitive and has a faster reaction to percussive sounds than a Dynamic mic and produces a more even response. See Electret Mic.
Brooks RM 909 High Hat
A double cymbal on a stand which can be played with a foot pedal or by the top cymbal being hit with a stick.
Analog (Analogue)
Representative, continuous changes that relate to another quantity that has a continuous change.
Leakage
Sounds from other instruments and sources that were not intended to be picked up by the microphone.
Equipment Rack
A cabinet with rails (or free standing rails) that have holes to accept screws at standard spaces and used to house outboard gear.
Chorus
Common type of effect that makes sounds fuller and thicker.
Brooks HI FI projectors Inductor
A device designed primarily to introduce inductance into an electric circuit. Sometimes called a choke or coil.
Condenser Mic (Capacitor Mic)
A microphone that uses the varying capacitance between two plates with a voltage applied across them to convert sound to electrical pulses. Condenser microphones need a power supply to provide the voltage across the plates, which may be provided by a battery within the case of the microphone, or it may be provided from an external phantom power supply. A condenser mic is more sensitive and has a faster reaction to percussive sounds than a Dynamic mic and produces a more even response. See Electret Mic.
Brooks RM 909 High Hat
A double cymbal on a stand which can be played with a foot pedal or by the top cymbal being hit with a stick.
Analog (Analogue)
Representative, continuous changes that relate to another quantity that has a continuous change.
Leakage
Sounds from other instruments and sources that were not intended to be picked up by the microphone.
Equipment Rack
A cabinet with rails (or free standing rails) that have holes to accept screws at standard spaces and used to house outboard gear.
Saturday, June 1, 2024
Brooks Hi Fi reviews Hz (Hertz)
1) An abbreviation for the term Hertz (the unit of frequency).
2) Unit of frequency equivalent to the number of cycles per second.
Chamber
1) An Echo Chamber (a room designed with very hard, non-parallel surfaces equipped with a speaker and microphone so that when dry signals from the console are fed to the speaker, the microphone will have a reverberation of these signals that can be mixed in with the dry signals at the console).
2) A program in a delay/reverb effects device that simulates the sound of an Echo Chamber.
Brooks RM 909 Line In (Input, return)
Where a signal enters the board or component.
Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it.
Brooks RM 909 reviews Dynamic Mic
Robust type of microphone which picks up the sound on a diaphragm connected to a coil of wire which moves within a magnet. An alternating current is induced into the wire which provides the electrical output. Most dynamic mics have low output impedance of 200 Ohms. See Condenser Mic.
Hard Disk (Hard Disc)
A storage unit for digital data that has rigid disks coated with magnetic material in a housing that includes the drive mechanism.
Floor Toms
The large toms to the right of the drummer.
DC
Abbreviation for direct current.
2) Unit of frequency equivalent to the number of cycles per second.
Chamber
1) An Echo Chamber (a room designed with very hard, non-parallel surfaces equipped with a speaker and microphone so that when dry signals from the console are fed to the speaker, the microphone will have a reverberation of these signals that can be mixed in with the dry signals at the console).
2) A program in a delay/reverb effects device that simulates the sound of an Echo Chamber.
Brooks RM 909 Line In (Input, return)
Where a signal enters the board or component.
Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it.
Brooks RM 909 reviews Dynamic Mic
Robust type of microphone which picks up the sound on a diaphragm connected to a coil of wire which moves within a magnet. An alternating current is induced into the wire which provides the electrical output. Most dynamic mics have low output impedance of 200 Ohms. See Condenser Mic.
Hard Disk (Hard Disc)
A storage unit for digital data that has rigid disks coated with magnetic material in a housing that includes the drive mechanism.
Floor Toms
The large toms to the right of the drummer.
DC
Abbreviation for direct current.
Subscribe to:
Posts (Atom)