A slide control used to send out a control voltage to several VCA faders in individual channels, thus controlling the gain of several channels.
Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.
Brooks Cinema TX 509 Fader
A control to control the gain of a channel on the console, thereby determining the level of the signal in that channel.
Input
1) The jack or physical location of where a device receives a signal.
2) The signal being received by a device.
3) The action of receiving a signal by a device.
Brooks TM-22 Arc
The visible sparks generated by an electrical discharge.
Isolation
A containing of the sound wave in a certain area so that it will not leak into other areas and/or unintended mics.
Key
The control of a dynamics processing device by an external audio signal.
Boundary Mic
A microphone mounted on a flat plate that acts as a reflective surface directing sound into the mic capsule. Used for general pick-up over a large area. See PCC, PZM.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.